
KLOW
80 mg vial
Research use only. AminoBlend supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

80 mg vial

70 mg vial

10 mg vial

10 mg vial
Buy peptide stacks online in Australia in two forms: pre-mixed blends, where several peptides share one lyophilized vial, and bundles, where separate vials are packed in one carton. Each one sits in Australian stock under its own lot certificate: compare the ratios below, choose the format your protocol needs and order in a few clicks.
| Blend | Contents | Fill |
|---|---|---|
| GLOW | GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg | 70 mg |
| KLOW | GHK-Cu, KPV, BPC-157 and TB-500 | 80 mg |
| Wolverine Blend | BPC-157 and TB-500 | 10 mg |
| CJC-1295 and Ipamorelin | CJC-1295 No DAC 5 mg, ipamorelin 5 mg | 10 mg |
| Tesamorelin and Ipamorelin | Tesamorelin 13 mg, ipamorelin 3 mg | 16 mg |
Blend ratios differ between suppliers selling under the same name, so compare the label and the certificate rather than the name alone.
The GLOW stack peptide pairs GHK-Cu, the copper tripeptide, with the two most ordered repair peptides, BPC-157 and TB-500. The GHK-Cu turns the freeze-dried cake blue. KLOW adds KPV, the anti-inflammatory tripeptide from alpha-MSH, which is where the K comes from. If your protocol has no reason to include KPV, GLOW is the simpler blend and, at $129, the lower priced vial. Order the KLOW vial instead when an inflammation readout is part of the study; at $139 for 80 mg it costs $10 more than GLOW but comes out marginally lower per milligram. Our guide on GLOW vs KLOW sets the two side by side.
"Wolverine stack" is the common name for BPC-157 with TB-500. BPC-157 research centres on growth factor and nitric oxide signalling, while TB-500, a fragment of thymosin beta-4, is studied for actin regulation and cell migration, which is why the two appear in the same protocols. Our BPC-157 vs TB-500 comparison explains the difference. Both compounds are on the World Anti-Doping Agency prohibited list.
CJC-1295 No DAC is a short-acting GHRH analogue and ipamorelin a selective ghrelin receptor agonist; pairing them tests the two pathways the pituitary uses to release growth hormone. The tesamorelin blend swaps in a full-length 44 amino acid GHRH analogue. Both are in the growth hormone peptides range, and the CJC-1295 and ipamorelin calculator works out concentration after reconstitution.
Each vial in a bundle is a full single product with its own lot number and certificate. The whole set is in the kits and bundles category, and every fixed-ratio vial sits in the peptide blends range.
Once peptides share a vial, the ratio is fixed and no single component can be measured or varied on its own. That is the trade.
Our recommendation: choose a blend only when your protocol already specifies those peptides together at that ratio; it means one reconstitution and one certificate instead of three or four. Choose separate vials, or a bundle, when you are comparing compounds, adjusting one, or have not settled the ratio. If you are unsure, start separate. This is guidance on research design, not on combining peptides for personal use.
No blend or bundle goes on sale until an outside laboratory has confirmed each molecule's mass and measured HPLC purity for that batch. Enter the vial's lot code on the COA lookup page to read the report, and for a blend make sure every component appears on it. See quality and testing. Volume buyers can use wholesale, and the wider peptides for sale in Australia page lists every single compound that can be ordered alongside a blend.
Every stack is sold as a laboratory reagent, never for people or animals. BPC-157, TB-500, GHK-Cu and CJC-1295 all appear in the TGA's April 2026 alert about unapproved peptides, and our team gives no dosing or stacking advice.
There is no shopfront to visit when you search for peptide stacks near me, and you do not need one. We hold every blend and bundle in Australian stock and sell them online to researchers across the country, so a lab in Hobart or Darwin buys the same lots, with the same certificates, as one in Sydney. Start in the peptide shop, add the stack and a bottle of bacteriostatic water to your cart, and the order is complete.
The best peptide stack for a study is the one whose components match its pathways. For muscle growth models, the most used stack is the CJC-1295 and ipamorelin blend; the best peptide stack for muscle growth and fat loss together pairs a growth hormone secretagogue with a metabolic compound in separate vials; repair models use the Wolverine Blend of BPC-157 and TB-500. Fixed-ratio blends save a vial; separate vials keep each concentration adjustable.
The table maps the stacks people search for to what we actually sell for each research model. Pre-mixed blends are listed where one exists; otherwise the stack is built from separate vials so each compound keeps its own certificate.
| Research model | Stack we would start with | Format and price |
|---|---|---|
| Muscle growth and lean mass models | CJC-1295 and ipamorelin blend | 10 mg blend, $65 |
| Growth hormone axis, longer GHRH analogue | Tesamorelin and ipamorelin blend | 16 mg vial (13 + 3), $129 |
| Fat loss and metabolic models | Tirzepatide with cagrilintide, or retatrutide with MOTS-C | Separate vials, from $59, $69, $129 and $69 |
| Healing and recovery models | Wolverine Blend | 10 mg blend, $69 |
| Skin and matrix models | GLOW, or KLOW where inflammation is also measured | 70 mg for $129, 80 mg for $139 |
| Energy and mitochondrial models | SS-31 with MOTS-C and NAD+ | Separate vials, $99, from $69 and $79 |
For lean mass and muscle growth models, the best muscle building peptide stack in the literature is a GHRH analogue with a ghrelin receptor agonist, because the two act on separate pituitary pathways and their effects on growth hormone pulses add together. The CJC-1295 and ipamorelin blend is the standard version, and it is also the usual answer to the best HGH peptide stack question. Bulking and bodybuilding searches point to the same pairing. We would pick the tesamorelin blend only when a study specifically needs the full 44 amino acid GHRH sequence.
Metabolic stacks are almost always built from separate vials, because the compounds are dosed on different schedules in published protocols and a fixed blend would lock that out. The pairing with the most published work is a GLP-1 based agonist with the amylin analogue cagrilintide. Retatrutide alongside MOTS-C is a newer pairing that brings a mitochondrial peptide into the model. Searches for the best weight loss peptide stack or the best peptide stack for cutting land here too; the research answer is the same.
The best peptide stack for healing and recovery models is the Wolverine Blend, which pairs BPC-157 and TB-500 at a fixed ratio in one vial. For skin, GLOW adds GHK-Cu to that pair. KLOW also includes KPV and is the better choice if an inflammation readout is part of the study. A best beginner peptide stack, in research terms, is whichever of these matches the model with the fewest components, so there are fewer variables to control.
Searches such as best peptide stack for men, best peptide stack for women, best peptide stack for men over 40, best female peptide stack or the best peptides to stack with TRT and testosterone are personal-use questions. We do not answer them, because every AminoBlend product is a laboratory reagent and nothing here is for human use. Anyone asking about their own hormones or health should speak to a GP or endocrinologist.
Stack is an informal word for two or more peptides studied in the same protocol. At AminoBlend it covers two different products: a pre-mixed blend, where the compounds share one freeze-dried cake under one lot code, and a bundle, where separate vials sit in one carton and each keeps its own lot code and certificate.
Each component is weighed to a set amount and the mixture is freeze-dried in a single vial, so the stated fill is the sum of its parts. GLOW, for example, is 50 mg of GHK-Cu plus 10 mg each of BPC-157 and TB-500, which makes 70 mg. The tesamorelin and ipamorelin blend works the same way at 13 mg plus 3 mg for a 16 mg vial.
Every peptide in a blend dilutes in proportion to its share of the fill. Reconstituting the 10 mg CJC-1295 and ipamorelin blend with 2 mL of bacteriostatic water gives 2.5 mg per mL of each compound, since each makes up half the vial. The CJC-1295 and ipamorelin calculator does this split automatically, and the same reasoning applies to the three parts of GLOW.
Names such as Wolverine, GLOW and KLOW are trade shorthand, not standards, so the ratio inside depends on who filled the vial. Read the component list and fill on the label, then confirm the certificate identifies every peptide named. On the GLOW listing the 50, 10 and 10 mg split is stated in full.
GLOW and KLOW form a blue cake because both carry GHK-Cu, while the Wolverine Blend and the two growth hormone blends are white. A blend certificate in the COA library should show a separate mass result for each component, so a four-part KLOW report carries more lines than a single-compound one. Bundles of separate vials, listed under kits and bundles, are checked vial by vial instead.
GLOW is a pre-mixed blend of three peptides in one lyophilized vial: GHK-Cu, BPC-157 and TB-500. AminoBlend supplies it as a 70 mg vial holding GHK-Cu at 50 mg plus BPC-157 and TB-500 at 10 mg apiece, and the lot code on the label links to its certificate of analysis.
AminoBlend sells peptide stacks online from Australian stock: the GLOW, KLOW, Wolverine, CJC-1295 with ipamorelin and tesamorelin with ipamorelin blends, plus bundles of separate vials. Every lot has a certificate in the COA library that names each component. Choose the blend, check its lot, add bacteriostatic water and buy it in one order.
The Wolverine stack is BPC-157 combined with TB-500. AminoBlend sells it as the Wolverine Blend, both peptides in one 10 mg lyophilized vial. For studies that compare the two or need to vary one, buy separate BPC-157 and TB-500 vials instead.
Buy a blend when your protocol already uses those peptides together at that fixed ratio, since it saves reconstitutions and lot numbers. Buy separate vials or a bundle when you need to measure or adjust one compound on its own, because a blend cannot be split once mixed.
For muscle growth and lean mass models, the most widely used stack is a GHRH analogue with a ghrelin receptor agonist. AminoBlend sells this as the CJC-1295 and ipamorelin blend, 5 mg of each in a 10 mg vial for $65. The tesamorelin and ipamorelin blend suits studies that need the full-length 44 amino acid GHRH analogue instead.
Metabolic stacks are usually built from separate vials so each compound keeps its own concentration and certificate. The pairing with the most published work is a GLP-1 based agonist such as tirzepatide with the amylin analogue cagrilintide. Retatrutide with MOTS-C is another option for models that include mitochondrial readouts. All are sold for laboratory research only.